All products from our B2B Suppliers - Kompass- Measuring and testing equipment - Denmark

Refine my search:
Return
Refine my search

By activity sector

By country

All countries 
View our Trusted Top Companies

Wind Measurement

EDSC Wind Measurement System for Cranes

ED Service-Center v/Mogens Hartmann

EDSC Wind Measurement System for Cranes

Techno-Matic, Customized Electronics

From development to finished product In collaboration with our customers, we develop electronics. We...

Techno-Matic A/S

From development to finished product In collaboration with our customers, we develop electronics. We make both software and hardware, and can deliver your solution to varying degrees depending on your...

Techno-Matic, Solutions for Forestry machines, Cranes, Lifts, and much more

Examples of solutions We have developed and produced solutions for a number of different machines wi...

Techno-Matic A/S

Examples of solutions We have developed and produced solutions for a number of different machines with a number of different purposes. We therefore have extensive experience with different types of is...

TM 2200

Tech Measure 2200 based on windows* and a standard computer is a system for intelligent bucking with...

Techno-Matic A/S

Tech Measure 2200 based on windows* and a standard computer is a system for intelligent bucking with complete collecting of data. The system will organize the bucking through tree species with a numbe...

TM 3002

The TM3006 controller for biomass boilers is designed for the control of small biomass boilers with ...

Techno-Matic A/S

The TM3006 controller for biomass boilers is designed for the control of small biomass boilers with or without oxygen control.The TM3006 was developed on the basis of the experience from the more adva...

TRAM, TDG - Telescopic Diagonal Gauge

The Telescopic Diagonal Gauge is used for measuring the difference between the length of the diagona...

Bent Tram A/S

The Telescopic Diagonal Gauge is used for measuring the difference between the length of the diagonal lines of insulation slabs of for example mineral wool or EPS. The swivelling angles at the ends of...

TRAM, PIT - Pendulum Impact Tester

The Pendulum Impact Tester offers a unique solution for generating, filing, and displaying quality d...

Bent Tram A/S

The Pendulum Impact Tester offers a unique solution for generating, filing, and displaying quality data. It is built around an instrumented impact tester and offers a fast and effective way of generat...

TRAM, MLG - Mechanical Lenght Gauge

MLG 160-210mm Weight4 kg Vertical daylight210 mm Supply VoltageInternal battery in Sylvac CS MFPM He...

Bent Tram A/S

MLG 160-210mm Weight4 kg Vertical daylight210 mm Supply VoltageInternal battery in Sylvac CS MFPM Height400 mm Width200 mm Depth200 mm Deformation resolution0.0010 mm

TRAM, Strain, Gauged Column

Parts list: EN12390-4 Strain Gauged Column/ 2 MN Force sensor class 1/0.5 – with calibration certifi...

Bent Tram A/S

Parts list: EN12390-4 Strain Gauged Column/ 2 MN Force sensor class 1/0.5 – with calibration certificate. Two spacer blocks – matching the 2MN Force sensor (50 mm high). Frame with magnets (DIN51302) ...

TRAM, Chamber, Tensile Tester

Stainless steel chamber. Circulation fan, heating power, window door heating to remove condensation....

Bent Tram A/S

Stainless steel chamber. Circulation fan, heating power, window door heating to remove condensation. 4 glass-platens. Temperature regulator magnetic valve for fluid N2 to cooling 1,8 kW 220 volt to he...

TRAM, Extensometer

Extensometers are used for measuring a deflection directly on the test specimen. Extensometers comes...

Bent Tram A/S

Extensometers are used for measuring a deflection directly on the test specimen. Extensometers comes in many different ways, from measuring very small deflections on reinforcing steel to large deflect...

TRAM, DST - Dynamic Stiffness Tester

DST 2,5N Loadcell Capacity25 N Weight140 kg Supply Voltage230V 50Hz Standards EN 29052-1Determinatio...

Bent Tram A/S

DST 2,5N Loadcell Capacity25 N Weight140 kg Supply Voltage230V 50Hz Standards EN 29052-1Determination of dynamic stiffness -- Part 1: Materials used under floating floors in dwellings ISO 9052Determin...

TRAM, MTG Pipe - Mechanical Thickness Gauge for Pipes

Specifications MTG-Pipe – 1.2 m Weight30 kg Height840 mm Width1250 mm Depth420 mm Max thickness to b...

Bent Tram A/S

Specifications MTG-Pipe – 1.2 m Weight30 kg Height840 mm Width1250 mm Depth420 mm Max thickness to be measured140 mm Max outer diameter666 mm Min inner diameter15 mm Standards EN 13467Thermal insulati...

TRAM, PTG - Pin Thickness Gauge

Hand held thickness gauge. To be used for measuring the thickness according to insulation material s...

Bent Tram A/S

Hand held thickness gauge. To be used for measuring the thickness according to insulation material standards.

TRAM, SUT - Small Universal Test Machine

SUT, the Small Universal compression/tension Tester offers a unique solution for small scale testing...

Bent Tram A/S

SUT, the Small Universal compression/tension Tester offers a unique solution for small scale testing, where limited force is required for tension and compression testing. It is ideally suited to quali...

TRAM, LTG - Laser Thickness Gauge

The gauge is designed for measuring the thickness of insulation according to EN823. It is equipped w...

Bent Tram A/S

The gauge is designed for measuring the thickness of insulation according to EN823. It is equipped with an accurate non-contact laser sensor and plates giving the correct contact pressure (50 Pa, and ...

TRAM, PID - Pipe Insulation Inner Diameter Dorn

Specifications PID 10mm-55mm Weight10 kg Max outer diameter55 mm Min inner diameter10 mm Standards E...

Bent Tram A/S

Specifications PID 10mm-55mm Weight10 kg Max outer diameter55 mm Min inner diameter10 mm Standards EN 13467Thermal insulating products for building equipment and industrial installations – Determinati...

TRAM, TEN - Tensile Testing Machine

Specially designed for the mineral wool industry, this universal tension tester offers a unique solu...

Bent Tram A/S

Specially designed for the mineral wool industry, this universal tension tester offers a unique solution for generating, filing and displaying quality data. It is built around a rigid frame with a bal...

TRAM, PCU - Pressure Control Unit

Designed for the Tram line of hydraulic testing machine the PCU 300 bar is a stand-alone pressure co...

Bent Tram A/S

Designed for the Tram line of hydraulic testing machine the PCU 300 bar is a stand-alone pressure control unit. The unit contains everything needed to control the machine, including motor, pump, reser...

TRAM, FFT - Open Frame Flexual Tester

Originally designed for the fibre-cement industry, the FFT range offers a unique solution for genera...

Bent Tram A/S

Originally designed for the fibre-cement industry, the FFT range offers a unique solution for generating, filing and displaying quality data. It is built around a specially designed testing machine, a...

TRAM, IJF - Intelli-Jack with Frame

Adapted for testing all types of materials and products, the Intelli-Jac range offers a unique solut...

Bent Tram A/S

Adapted for testing all types of materials and products, the Intelli-Jac range offers a unique solution for generating, filing and displaying quality data. It is built around a specially designed test...

TRAM, AUT Autoclave

AUT 11 Weight100 kg Supply Voltage230 V with ground, 50 Hz Height800 mm Width700 mm Depth600 mm Volu...

Bent Tram A/S

AUT 11 Weight100 kg Supply Voltage230 V with ground, 50 Hz Height800 mm Width700 mm Depth600 mm Volume11 l Max operating pressure16 bar Heating element1.5 kW Operating temperature10°C - 203°C

TRAM, PCU - Pressure Control Unit

Designed for the Tram line of hydraulic testing machine the PCU 300 bar is a stand-alone pressure co...

Bent Tram A/S

Designed for the Tram line of hydraulic testing machine the PCU 300 bar is a stand-alone pressure control unit. The unit contains everything needed to control the machine, including motor, pump, reser...

TRAM, ITJ -Intelli-Jack

Adapted for testing all types of materials and products, the Intelli-Jac range offers a unique solut...

Bent Tram A/S

Adapted for testing all types of materials and products, the Intelli-Jac range offers a unique solution for generating, filing and displaying quality data. It is built around a specially designed test...

TRAM, UCT - Universal Compression and Tension Testing Machine

The UCT is fully controlled from the accompanying PC with the professional Tram-QA software that can...

Bent Tram A/S

The UCT is fully controlled from the accompanying PC with the professional Tram-QA software that can run virtually any test fully automatically and at the same time automatically collect testing resul...

TRAM, MLG - Mechanical Lenght Gauge

Specifications MLG 160-210mm Weight4 kg Vertical daylight210 mm Supply VoltageInternal battery in Sy...

Bent Tram A/S

Specifications MLG 160-210mm Weight4 kg Vertical daylight210 mm Supply VoltageInternal battery in Sylvac CS MFPM Height400 mm Width200 mm Depth200 mm Deformation resolution0.0010 mm Standards ASTM C49...
Back to top