Métallurgie, mécanique et sous-traitance produits dans Corée du Sud

Affiner ma recherche
Retour
Affiner ma recherche

Par secteurs d’activité

Par pays

Tous les pays 
Kompass vous recommande :

Engrenage de transmission pour camion et bus

Vitesse de transmission pour camion, bus

Tongil Industries Co., Ltd

Vitesse de transmission pour camion, bus

2GPP Carbide drill for S45C, SCM, cast steel

Korean carbide drill. This carbide drill is used for machining automotive parts such as S45C, SCM, c...

COGO TOOL CO.,LTD.

Korean carbide drill. This carbide drill is used for machining automotive parts such as S45C, SCM, cast steel, and cast iron. • Suitable for various processing such as carbon steel, alloy steel and sp...

2GBS for Carbon Steels cutting | 2GBS Drills

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast s...

COGO TOOL CO.,LTD.

K-Drill : 2GBS - Flute GBS Drill * Application : the best performance when drillng S45C, SCM, cast steels and cast iron etc. of automobile parts. • FLUTE design considering optimal tool stiffness and ...

2WSB for stainless steel cutting | high hardness End Mills

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high ha...

COGO TOOL CO.,LTD.

S-hard : 2WSB - 2Flutes SHORT BALL Endmill * Pre-hardened steels can be applied to medium to high hardness work pieces. (HRC40~62) • Dividin and double flute make it easy to prevent shaking and chip e...

2HOB pour la coupe du cuivre | Fraises en cuivre

K-COPPER: 2HOB - Fraises à bout hélicoïdal à 2 cannelures 45 ° pour cuivre * Fraises en bout pour cu...

COGO TOOL CO.,LTD.

K-COPPER: 2HOB - Fraises à bout hélicoïdal à 2 cannelures 45 ° pour cuivre * Fraises en bout pour cuivre, alliage de cuivre, matériaux non ferreux et non métalliques. • Améliorez la résistance à l'usu...

2GSS ,Solid Carbide Drill

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materi...

COGO TOOL CO.,LTD.

K DRILL: 2GSS Solid Caride Drill, Straight shank It is suitable for a wide range of workpiece materials such as cast steel, cast iron, non-ferrous metals and plastics by using high-grade tungsten carb...

4BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 4BRE - Rib Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...

Fraises en bout B-Hard | 2BCB pour l'acier trempé sous coupe HRC70

B- DURE: fraises à bout sphérique standard 2BCB-2Flutes * Fraises en bout pour acier pré-trempé et t...

COGO TOOL CO.,LTD.

B- DURE: fraises à bout sphérique standard 2BCB-2Flutes * Fraises en bout pour acier pré-trempé et trempé (HRC52 ~ 70) • Conçu pour la coupe à grande vitesse des aciers trempés sur HRc52. • Maximise l...

2WCB for Heat treated steel / SUS | S HARD Stamdard Ball

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardne...

COGO TOOL CO.,LTD.

S-HARD : 2WCB - Ball Endmill (2FLUTES) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40 ~ 62 • Dividing and double flute make it eassy to prevent shaking and chip e...

2MFD &2MFL Flat drill

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for mater...

COGO TOOL CO.,LTD.

K DRILL : 2MFD, 2MFL Carbide 2 Flutes, Multi-processing Flat Drill, Long Drill *Flat drill for material below HRC50, pre-hardened steel, alloy steel, cast iron and aluminum. *With flat type of end fac...

4VSU Variable Helix Endmills for SUS

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base all...

COGO TOOL CO.,LTD.

K SUS: 4VSU 4 Flutes Variable Helix End Mills for SUS *Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials. *JCRO coating provides wear resistance improvement as well as...

4DRC for Carbon, Alloy, Prehardened, Heat Treaded Steels + Copper | Corner Rounding Cutter

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, too...

COGO TOOL CO.,LTD.

K-GENERAL : 4DRC - Corner Rounding Cutter (4Flutes) * Hardened steel(HRC52), pre-hardened steel, tool steel and cast iron • High precise edge tolerance. • Very nice work surface finish. To purchase a ...

3AHF mirror finishing endmill for aluminum

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL...

COGO TOOL CO.,LTD.

K ALUMINUM: 3AHF 3 Flutes Mirror Finishing Cutting End Mills for Aluminum *Endmills for Aluminum, AL alloy, non-ferrous and non-metallic materials. *By 25° helix flute edge design with the after-treat...

3AHE pour la découpe de l'aluminium | Fraises en aluminium

K-ALUMINIUM: Fraises hélicoïdales 45 ° 3AHE-3 pour aluminium * Fraises pour aluminium, alliage AL, m...

COGO TOOL CO.,LTD.

K-ALUMINIUM: Fraises hélicoïdales 45 ° 3AHE-3 pour aluminium * Fraises pour aluminium, alliage AL, matériaux non ferreux et non métalliques. • Qualité WC ultra fine appliquée (0,2㎛) pour une excellent...

2BRB for Heat Treated Steels | B HARD Rib Ball Endmills

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70...

COGO TOOL CO.,LTD.

B-HARD : 2BRB - Rib Ball Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance du...

4WCR / S-HARD for corner radius endmills

S-HARD endmill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel s...

COGO TOOL CO.,LTD.

S-HARD endmill provides good results on medium-hardness work-pieces of HRC40~62 pre-hardened steel series. • Dividing and double flute make it easy to prevent shaking and chip ejection. • Enables high...

2KSB for Prehardened Steels, Heat Treated Steels | K HARD Short Ball

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~...

COGO TOOL CO.,LTD.

K-HARD : 2KSB - Short Ball Endmill (2FLUTES) * Endmills for pre-hardened and hardened steel (HRC52 ~ 60) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance...

2WCR | S HARD Corner Radius Endmills

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to...

COGO TOOL CO.,LTD.

S - HARD : 2WCR - Corner Radius Endmills (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces. / HRC40~62 • Dividing and double flute make it easy to prevent saking an...

2GSL carbide long drill

Korean carbide drill. This carbide long drill is used for machining automotive parts such as S45C, S...

COGO TOOL CO.,LTD.

Korean carbide drill. This carbide long drill is used for machining automotive parts such as S45C, SCM, cast steel, and cast iron. • It is suitable for a wide range of workpiece materials such as cast...

4TSR, 4TSC T-Slot Cutter

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(...

COGO TOOL CO.,LTD.

K GENERAL: 4TSR, 4TSC 4 Flutes T-R Slot Cutter *Endmills for various work materials, hardened steel(HRC~50), pre-hardened steel,tool steel and cast iron. *Minimize edge chipping by applying straight 4...

4BCE fpr Heat Treated Steels | B HARD Square Endmills

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) ...

COGO TOOL CO.,LTD.

B-HARD : 4BCE - Square Endmills (4Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due ...

4FCE for Alloy Steels | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

4TNA Helix Nick Type Thread Mill

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Al...

COGO TOOL CO.,LTD.

K-THREAD MILL : 4TNA 4 Flutes Helix Nick Type Thread Mill for Aluminum *Thread mill for Aluminum, Aluminum alloy, non-ferrous and non-metallic materials. *High spindle speed and feed per tooth are ava...

4WCE for Heat treated steel / SUS | S HARD Square Endills

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to ...

COGO TOOL CO.,LTD.

S-HARD : 4WCE - Corner Radius Endmills. (2Flutes) * Pre-hardened steels can be applied to medium to high hardness work pieces.(HRC40~62) • Dividing and double flute make it easy to prevent shaking and...

5&6 MTR Trochoidal Milling End Mills

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,...

COGO TOOL CO.,LTD.

K-MULTI : 5&6MTR 5&6 Flutes Trochoidal Milling End Mills *Roughing Endmills for alloy steel,inconel, soft steel, SUS and various hard to cut materials. *HR coating reduces stress of flute and ...

K-ABS End Mills | 1NEM for Acryl, ABS, Aluminum, Endmills

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materia...

COGO TOOL CO.,LTD.

K- ABS : 1Flute Endmills * Endmills for Acryl, A.B.S, Aluminum, non-ferrous and non-metallic materials • Excellent chip removing by a helix flute design. • Optimum for cut-off and wall machining.

4ESE for Carbon + Alloy + Prehardened Steels | K BLUE Endmills for Heavy cuts

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-...

COGO TOOL CO.,LTD.

K-BLUE : 4ESE - Endmills for Heavy cuts (4Flutes) * Endmills for various work materials(~HRC52),pre-hardened steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel • Good wear resistance by h...

2DBL pour la découpe de graphite | Fraises en graphite

K-GRAPHITE: 2DBL- Fraises à bout sphérique à 2 cannelures diamantées pour graphite * Fraises pour gr...

COGO TOOL CO.,LTD.

K-GRAPHITE: 2DBL- Fraises à bout sphérique à 2 cannelures diamantées pour graphite * Fraises pour graphite, plastique renforcé, fibre de carbone, matériaux non ferreux et non métalliques. • Large gamm...

8ECP end mills for composite

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/...

COGO TOOL CO.,LTD.

K-COMPOSITE : 8~12ECP 8~12 Flutes Finishing End Mills for Composite *Endmills for CFRP, GFRP, glass/carbon fiber, graphite, nonferrous and non-metallic materials. *Outstanding performance in machining...

2WCE pour les coupes en acier inoxydable | dureté élevée End Mills

S-hard : 2WCE - 2Flutes Standard Endmill * Aciers pré-durcis peuvent être appliqués sur des pièces d...

COGO TOOL CO.,LTD.

S-hard : 2WCE - 2Flutes Standard Endmill * Aciers pré-durcis peuvent être appliqués sur des pièces de travail de dureté moyenne à élevée. (HRC40~62) • La dividine et la flûte ddouble facilitent les se...

4FNR | K BLUE Finishing Endmill

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same t...

COGO TOOL CO.,LTD.

K-BLUE : 4FCE - Roughing and Finishing Endmill (4FLUTES) * Structure which facilitates at the same time process of roughing and finishing / 4Flutes • Possible to process roughing and finishing at the ...

2HGB for Carbon, Alloy, Prehardened Steels | Ball Endmills for Generality

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various wor...

COGO TOOL CO.,LTD.

K-GSERIES : 2HGB - Standard Length Ball Endmills for Generality (2Flutes) * Endmills for various work materials(~HRC52), pre-hardened steel, carbon steel, mold steel • High precise edge tolerance. • M...

2BRE for Heat Treated Steels | B HARD Rib Endmills

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • D...

COGO TOOL CO.,LTD.

B-HARD : 2BRE - Rib Endmills (2Flutes) * Endmills for pre-hardened and hardened steel (HRC52~70) • Designed for high speed cutting of hardened steels over HRc52. • Maximize the wear-resistance due to ...

Compresseur

Compresseur Turbo 50–800 chevaux, 1.5–4.0 kgf/cm⊃2;G Compresseur turbo sans huile

Turbo Technology

Compresseur Turbo 50–800 chevaux, 1.5–4.0 kgf/cm⊃2;G Compresseur turbo sans huile

Compresseur

Compresseur Turbo 100–600 chevaux, 7.0–9.0 kgf/cm⊃2;G Compresseur turbo sans huile

Turbo Technology

Compresseur Turbo 100–600 chevaux, 7.0–9.0 kgf/cm⊃2;G Compresseur turbo sans huile

Souffleur

Souffleur Turbo 20–1.800 chevaux, 0.4–1.2 Bar(g) Souffleur turbo sans huile

Turbo Technology

Souffleur Turbo 20–1.800 chevaux, 0.4–1.2 Bar(g) Souffleur turbo sans huile

MOTEUR À RÉDUCTEUR BLDC

Le poids du moteur varie de 500 g à 1800 g. Ce moteur est destiné aux moteurs de volets roulants et ...

PARK ENGINEERING LTD.

Le poids du moteur varie de 500 g à 1800 g. Ce moteur est destiné aux moteurs de volets roulants et aux systèmes de portes automatiques. Code HS : 8501.40.1000

MOTEUR BLDC À ROTOR EXTÉRIEUR

Le poids du moteur est de 2 500 g. Ce moteur est destiné à un lave-vaisselle.

PARK ENGINEERING LTD.

Le poids du moteur est de 2 500 g. Ce moteur est destiné à un lave-vaisselle.

MOTEUR À RÉDUCTEUR À PÔLE DÉGRADÉ CA

Le poids du moteur varie de 500 g à 1900 g. Ce moteur est destiné aux moteurs de volets roulants, de...

PARK ENGINEERING LTD.

Le poids du moteur varie de 500 g à 1900 g. Ce moteur est destiné aux moteurs de volets roulants, de convoyeurs, etc. Code HS : 8501.40.1000

MOTEUR DE CONDENSATION

Le poids du moteur est compris entre 500 g et 1 200 g. Ce moteur est destiné au refroidissement et à...

PARK ENGINEERING LTD.

Le poids du moteur est compris entre 500 g et 1 200 g. Ce moteur est destiné au refroidissement et à la climatisation. HSCODE : 8501.40.1000

VENTILATEUR CENTRIFUGE BLDC

Le poids du moteur est de 1 200 g. Ce moteur est destiné aux conduits.

PARK ENGINEERING LTD.

Le poids du moteur est de 1 200 g. Ce moteur est destiné aux conduits.
Retour en haut